Trican - Technology / Coiled Tubing / High pressure jetting technology

NEW TECHNOLOGY - COILED TUBING

High pressure jetting technology

HydroMill™
HydroMill is a compact, high-pressure jetting tool that is designed to remove heavy scale deposits from production tubing. The tool s high-efficiency jetting nozzles operate at up to differential pressures of 70,000 kPa (10,000 psi) and provide 100% coverage of the cutting face to ensure performance even if the tubing is completely blocked with scale. The nozzles are positioned at minimum standoff from the tubing wall to enable rapid de-scaling performance under high-pressure downhole conditions using water, water with polymer additives and two-phase water/nitrogen fluids. Proprietary high-efficiency, low-torque seals eliminate power losses due to leakage and friction. Set-down and potential stall of the tool on an obstruction is indicated by a pressure drop on the fluid pumping unit. Simply picking up off the obstruction frees the unit to resume rotating.

HydroMill is proven effective in removing heavy silicate scale and iron sulfide scale, as well as calcium carbonate. During milling out of calcium carbonate, rates of penetration were observed to be the same as those using milling technology. HydroMill is also used for:

HydroMill^TM Video (wmv)

HydroMill Brochure (PDF download)

HydroClean™ and HydroStim™
The HydroClean and HydroStim tools are high-pressure rotating jetting nozzles deployed on coiled tubing. Similar in functionality, the tools are differentiated by the jet configuration of their nozzles. Both tools are capable of jetting fluids at high pressure in order to perform various operations such as scale removal, well cleanouts or acid stimulations. Their features include:

42.9 mm (1.69 in) OD (outer diameter) design will pass through conventional 60.3 mm (2.37 in) profiles
High pressure jetting powerfully cleans the surface of the production tubing
High quality jets for effective cleaning of scale and hard packed sand
Increases effectiveness of solvent or acid because of the turbulence and jetting energy
Sour service compatible
Versatile - acid, solvent or water jet cleaning
360° jetting for hard to reach areas in the completion (e.g. gas lift mandrels, sliding sleeves, screens, etc.)

Brochure (PDF download)

SpinCat tools
SpinCat downhole tools are designed to remove plugs, scale and failed linings. Attached to coiled tubing and self rotating, the tool’s viscous fluid governor controls the rotation speed to maximize jet power delivered to the tubing walls. The SpinCat nozzles feature few but large rotating jets, providing a powerful force of fluid for removal of deposits without damaging the well pipe.